quantus

Deployment for a Quantus Network Planck node and its external GPU miner.

Two components, two hosts:

Component	Host	Role
quantus-node	bob.hanzalova.internal	consensus, P2P, reward address. Disk + network bound.
quantus-miner	benjy.hanzalova.internal	Poseidon2-over-Goldilocks search on 1× RTX 4090. Pure GPU compute.

They are split deliberately. Setting --miner-listen-port on the node disables its built-in CPU mining, so the node authors nothing unless an external miner is connected — the split is not optional once that flag is set. The miner connects out to the node over QUIC/9833 and listens on nothing but a loopback metrics port.

Conventions: ~/git/architecture — generic.md for the on-host shape, deployment-gitea-actions.md for the deploy mechanism. Deviations are listed below.

Why GPU, and why only these hosts

The proof-of-work is Poseidon2 over the Goldilocks field (p = 2⁶⁴ − 2³² + 1), width 12, 4 external + 22 internal rounds — an arithmetic hash, not a bit-mixing one. Cost is dominated by 64-bit modular multiplication, the state lives entirely in registers, and there is no memory hardness at all. Measured on this fleet:

Hardware	Hashrate	Power	Efficiency
RTX 5090 (beast, ×2)	368 MH/s each	600 W	0.60 MH/s/W
RTX 5090 @ 400 W floor	281 MH/s	400 W	0.70 MH/s/W
RTX 4090 (benjy)	183 MH/s	450 W	0.41 MH/s/W
Ryzen 9 9950X3D, 32t	4.15 MH/s	—	—
Xeon E5-2620 v3, 12t (bob)	0.50 MH/s	—	—

A single 5090 at its minimum power limit out-hashes every CPU in the fleet combined by roughly 24×. CPU mining is therefore disabled everywhere (--cpu-workers 0), including on the GPU hosts, where it would add ~1% hashrate for a couple hundred watts. The old Xeons are node-capable and mining-worthless.

GPU/CPU parity is verified upstream (engine-gpu's gpu_cpu_parity example, 25/25 jobs) — the GPU is doing real work, not advancing a lying counter.

Ports

Registered in ~/git/architecture/port-allocations.md §5.

Port	Proto	Component	Exposure
30333	tcp	node P2P (libp2p)	public — named firewalld service
9833	udp	node ← miner control channel	mesh, firewalld rich rule scoped to the miner host only
9615	tcp	node Prometheus	loopback
9900	tcp	miner Prometheus	loopback

Deviation from port-allocations.md §3: these are upstream protocol defaults, not numbers derived from the service name. 30333 is the chain's well-known P2P port and changing it buys nothing; 9833 is the miner protocol's default and both ends must agree. They are recorded in the registry, which is what the doc says actually prevents collisions. Neither lands in the crowded alt-HTTP cluster.

The miner link gets a rich rule rather than a plain --add-service because the fleet uses a single default zone (generic.md §9): adding the service outright would publish 9833/udp on every address the host carries, and upstream is explicit that this port must never face the internet.

Secrets

Name	What	Set by
RSYNC_SSH_KEY	the shared fleet runner key	already exists — do not rotate
QUANTUS_INNER_HASH	32-byte wormhole preimage, 0x-prefixed	script/infra-setup.sh --mint-reward-key

Mining rewards accrue to a wormhole address derived from QUANTUS_INNER_HASH. The script derives it from a wallet seed phrase read on stdin, so rewards land in a wallet you already control and appear with no claiming step.

It will not generate a fresh wallet for you. A newly minted wormhole key's 24-word phrase is the only way to ever spend what it accumulates, and it fails agent-credentials.md §1 outright — a seed controlling real funds is escalation-grade and must not enter ~/.agents. Create the wallet in the Quantus wallet app, back the phrase up there, then feed it in.

The miner's own credentials — miner-auth-token and miner-tls-cert-sha256 — are not secrets in this repo. The node generates them on first start and regenerates them if its base-path is ever wiped, so the deploy copies them from the node to the miner on every run. That makes the pairing self-healing instead of a silent auth failure six months later.

Usage

One-time, from a workstation with sudo ssh to the targets:

./script/infra-setup.sh --pubkey ~/.ssh/id_gitea_ci.pub
./script/infra-setup.sh --mint-reward-key      # reads a seed phrase on stdin

Then push to main, or run the deploy workflow from the Actions UI. It has two modes:

• deploy (default, and what a push does) — apply, then validate.
• validate — check only, change nothing. Asserts each unit is active, the installed binary matches the pinned version, the node's P2P and miner ports are listening, peers are connected, the GPU is enumerated and drawing power, and miner_hashes_total is advancing.

systemctl is-active alone is not evidence this stack works: a miner that found no GPU adapter, and a node that is authoring nothing because no miner is attached, both look perfectly healthy to systemd. Hence the counter check.

Upgrades are deliberate — bump NODE_VERSION / MINER_VERSION in the workflow. There is no auto-update on a validator on purpose.

Known conflict: helexa on benjy ⚠️

benjy already runs helexa neuron on :13131 (architecture/generic.md §11, inference.md), serving inference from the same RTX 4090 this miner will saturate. They will contend directly: the miner drives the GPU to ~95% utilisation and ~450 W continuously, which will make inference latency on benjy by turns awful and unpredictable.

Nothing here resolves that, and the deploy does not try to arbitrate. Options, in rough order of preference:

1. Move mining to beast (2× 5090, and 4× the hashrate) and leave benjy to inference. Requires checking what beast's neuron is doing first.
2. Make the miner yield — --gpu-throttle-ms, or an ExecCondition that refuses to start while a model is loaded.
3. Accept the contention on benjy and treat inference there as best-effort.

Decide before enabling quantus-miner.service on benjy, not after.

Deviations from house convention

• runs-on: infra, not fedora-43. gitea-runners.md §4 says a deploy needs only ssh + rsync and so fits fedora-43. That is about tooling, not routing — these targets are mesh-only .internal names, and lair/mail's two working deploys both use infra for that reason. Revisit if the fedora runners gain mesh reachability.
• Upstream protocol ports rather than derived ones — see Ports above.
• MemoryDenyWriteExecute=false on the node (Substrate JITs its wasm runtime through wasmtime) and PrivateDevices=false on the miner (needs /dev/nvidia*). Both are annotated in the unit files; neither is tidy-up-able.
• Type=simple, not notify — quantus-node does not sd_notify(READY=1).
• No Rust workspace. This repo deploys upstream release binaries; there is nothing to build, so generic.md §1–§2 do not apply.

Upstream

• node — https://github.com/Quantus-Network/chain (MINING.md is the real doc)
• miner — https://github.com/Quantus-Network/quantus-miner
• guide — https://docs.quantus.com/guides/mining

Note that Planck is a testnet: "tokens have no monetary value". Mainnet difficulty and reward schedule are unpublished, so no profitability claim here is possible yet. Also worth tracking: this PoW has no memory hardness and a small fixed state, which makes it an unusually clean FPGA/ASIC target — relevant to any decision to buy hardware for it.