Fedora for the Lenovo Yoga C630 13Q50

Builds a ready-to-write Fedora aarch64 disk image for the Lenovo Yoga C630 (model 81JL, Qualcomm SDM850), using Gitea Actions.

The approach is borrowed from aarch64-laptops/build, but the heavy lifting that project had to do in 2019 is now unnecessary: mainline Linux has carried sdm850-lenovo-yoga-c630.dts since 5.5, and Fedora ships it in kernel-core. There is no kernel to patch and no GRUB to compile. What is left is assembling a disk image that boots on hardware whose firmware hands Linux no device tree.

What you get

output/fedora-44-<variant>-lenovo-yoga-c630-<date>-<ref>.img.zst — a GPT disk image with an ESP, a /boot partition and an ext4 root. Decompress, write it to a USB stick or microSD card, and boot. The root filesystem grows to fill the medium on first boot.

Two variants:

Variant	Size	Contents
minimal	8 GiB	Console, sshd, and enough tools to debug the machine
workstation	16 GiB	GNOME desktop

Default login is fedora / fedora, and the password must be changed at first login. Root is locked.

Hardware status

Works out of the box	Needs firmware from Windows	Not supported
UFS storage, USB, keyboard, touchpad, touchscreen	Graphics (Adreno 630 zap shader)	LTE modem
WiFi + Bluetooth (ath10k WCN3990)	Audio
Battery and charging	Sensor hub — lid switch, accelerometer, auto-rotate
Display (unaccelerated)	Hardware video decode (venus)

Fedora ships everything Qualcomm permits to be redistributed, which covers WiFi and Bluetooth outright. Graphics is the awkward case: the generic Adreno pieces (a630_gmu.bin, a630_sqe.fw) are packaged, but the C630's device tree asks for a model-signed zap shader, qcdxkmsuc850.mbn, which exists only in your machine's Windows partition — Fedora's generic sdm845/a630_zap.mbn is not what this device requests. Audio, sensors and video decode are the same story.

Run sudo c630-firmware once after installing — see docs/firmware.md for the full list and a manual fallback.

Building

CI does this on every push to main. To run it yourself:

./build/build-image.sh --variant minimal

You need podman and, on an x86_64 host, aarch64 emulation:

sudo dnf install -y qemu-user-static-aarch64
sudo systemctl restart systemd-binfmt

build/build-image.sh runs on the host and only sets up the container. build/stage2.sh runs inside an aarch64 Fedora container and does everything else: dnf --installroot, the overlay, dracut, and the disk assembly. It builds filesystems from directory trees with mke2fs -d and mcopy rather than mounting loop devices, so it does not need /dev/loop-control — which CI runners generally will not hand out.

Iterating

Every aarch64 binary runs under emulation, and the dnf transaction is essentially all of the cost — 500-odd packages' worth of rpm scriptlets for minimal, four times that for workstation. Everything after it takes minutes. Since getting this machine to boot will take a few attempts, the build is arranged so you only pay that once:

• The post-dnf root filesystem is staged under <work>/base, keyed on a hash of the package lists, release and variant. Editing config/device.env, overlay/, or the bootloader config reuses it. Editing config/packages/ invalidates it automatically.
• The working copy is made with cp --reflink=auto, so on btrfs or xfs it is a copy-on-write clone rather than a real copy.
• Downloaded rpms live in .cache/dnf, outside the staged tree, so even --fresh re-runs the scriptlets without re-downloading.

In practice a kernel-command-line change rebuilds in a few minutes.

./build/build-image.sh --variant minimal            # reuses the staged base
./build/build-image.sh --variant minimal --fresh    # forces a reinstall
./build/build-image.sh --variant minimal --keep-rootfs   # keep the tree to poke at

CI points --work and --cache at /var/tmp/c630-build so both survive between jobs. That is per-runner, so the first build on a given runner is cold.

The build container defaults to git.lair.cafe/gongfoo/build-fedora-44-aarch64, which ships the assembly tooling so it does not have to be installed under emulation on every run. If that image is not reachable the build falls back to stock Fedora and installs the tooling itself — slower, but it works.

Repository layout

config/device.env            C630 parameters: DTB path, kernel command line, geometry
config/packages/*.pkgs       Package lists — base plus one file per variant
overlay/                     Files copied into the root filesystem (*.in are templated)
build/build-image.sh         Host driver: emulation checks, podman invocation
build/stage2.sh              The actual build, inside an aarch64 container
firmware/local/              Optional drop-in for firmware you extracted yourself (gitignored)
.gitea/workflows/            CI
docs/                        Installation, firmware, runner setup

Documentation

• docs/install.md — writing the image and booting the laptop
• docs/firmware.md — what needs extracting from Windows and why
• docs/runner-setup.md — one-time Gitea runner preparation

Boot status

Confirmed on hardware, from a USB stick:

• GRUB loads the kernel and the device tree
• The kernel comes up and probes the SDM850 — UFS controller, display subsystem, WiFi and IPA all appear as platform devices, so DEVICE_CMDLINE and the DTB are right
• The framebuffer console works (simple-framebuffer, 240x67)
• The root filesystem mounts, systemd starts, and it reaches a login prompt
• Networking works over a USB WiFi dongle, and sshd is reachable
• build/install-to-disk.sh copies it onto the internal UFS

Not yet confirmed: booting from the internal drive rather than USB.

Onboard WiFi does not appear at all, and audio, sensors, video decode and accelerated graphics are all absent — every one of them waiting on the model-signed firmware described in docs/firmware.md. On this machine Windows has been wiped, so those blobs are gone; the kernel names each missing file explicitly in dmesg.

The internal drive needs build/install-to-disk.sh rather than dd: its UFS uses 4096-byte logical sectors, which the 512-byte image geometry cannot be written onto directly. See docs/install.md.

SELinux is shipped permissive — see below.

SELinux

The build labels the filesystem offline with setfiles, so enforcing should work. It ships permissive anyway, because the failure mode is unusually punishing: an unlabelled root takes PID 1 down with Failed to allocate manager object before anything can be logged into and repaired, and /.autorelabel cannot save it because nothing survives long enough to act on the flag.

Once the machine is up and you are happy with it:

sudo setenforce 1                 # try it for this boot
sudo sed -i 's/^SELINUX=.*/SELINUX=enforcing/' /etc/selinux/config

Or set SELINUX_MODE=enforcing in config/device.env and rebuild.

Caveats

The kernel command line and firmware layout are taken from Fedora's Snapdragon WoA documentation and the aarch64-laptops project; the parts specific to the C630's older SDM850 are reasoned from those rather than derived from documentation for this machine. Findings belong in this README.