## Why
Filesystem denials and managed-network blocks did not share a structured event
shape, requiring downstream consumers to rediscover enforcement paths and parse
backend-specific output. See https://github.com/openai/codex/pull/17573.
## What changed
- Add normalized filesystem and network violation types in `codex-sandboxing`
and emit them through a shared tracing seam.
- Classify filesystem denials by backend and reason, retaining an optional path
and bounded output snippet, and preserve managed-network block context.
- Report the sandbox type through exec-server responses so unified exec can
classify remote denials without guessing; omitted values remain compatible
with older peers.
- Record violations from exec, apply-patch, shell-escalation, unified-exec, and
managed-network enforcement paths without changing denial behavior.
## Testing
- Cover filesystem classification, path extraction, `SIGSYS`, network event
conversion, protocol compatibility, and remote sandbox-type propagation.
GitOrigin-RevId: d673173b4fa6bdf0a24421194a8a61c81fab9c96
## What changed
- Forward remote managed-network policy requests to the controller-side decider when Guardian review is enabled.
- Bound callbacks using the configured permission-hook and Guardian review timeouts, restore trusted execution attribution, and recheck live baseline policy before requesting a decision.
- Cancel pending decisions when the process or execution scope ends, and propagate EOF across the sandbox proxy bridge with half-closes.
## Testing
- Cover callback enablement, strict allowlist behavior, live policy updates, trusted attribution, and execution-scope cancellation.
GitOrigin-RevId: 83b47657c8c4546dfe98eec8b272833e96a46b7e
## Summary
- complete unified-exec processes from the ordered event stream instead
of issuing a final zero-wait `process/read`
- add optional executor sandbox-denial state to `process/exited`
- retain `process/read` as a retained-output and compatibility fallback
for receiver lag, sequence gaps, and legacy servers
- recover sandbox-denial state across transport reconnection
- cover the real `TestCodex` remote-exec path without adding a public
test-only event constructor
## Why
A successful one-shot tool call currently receives its output and
terminal notifications, then pays another wide-area `process/read` round
trip before returning. Staging traces showed that remote response wait
accounted for more than 99.8% of RPC time; local serialization,
queueing, and deserialization were below 0.6 ms.
## Measured impact
A direct staging A/B used the same build and route and changed only
completion mode. Each arm ran three times with 30 one-shot
`/usr/bin/true` calls per run. The table reports the median of the three
per-run percentiles.
| Metric | Final `process/read` | Pushed events | Change |
| --- | ---: | ---: | ---: |
| End-to-end completion p50 | 159.5 ms | 118.7 ms | -40.8 ms (-25.6%) |
| End-to-end completion p95 | 182.4 ms | 131.7 ms | -50.6 ms (-27.8%) |
| Completion-wait p50 | 80.1 ms | 41.5 ms | -38.5 ms (-48.1%) |
| Final `process/read` RPC p50 | 79.9 ms | eliminated | -79.9 ms |
TCP_NODELAY was enabled in both A/B arms, so its effect cancels out. The
successful, complete, in-order event path issued zero final
`process/read` calls.
## Compatibility and recovery
- new servers send `sandboxDenied` on `process/exited`
- legacy servers omit it, which triggers one compatibility
`process/read`
- broadcast lag or a sequence gap triggers a retained-output read
- recovery remains bounded by the server's existing 1 MiB
retained-output window
- complete, in-order event streams issue no completion read
- sandbox denial is attached to the exit event before consumers can
observe process completion
- server-first and client-first rollouts remain wire-compatible;
server-first realizes the latency win immediately
## Integration coverage
The `TestCodex` suite exercises four distinct remote-exec contracts:
- complete pushed output/exit/close with zero reads
- direct pushed sandbox denial with zero reads
- legacy missing denial metadata with exactly one compatibility read
- count-bounded replay eviction recovered from retained output without
duplication
## Validation
- `just test -p codex-core
exec_command_consumes_pushed_remote_process_events`: 4 passed
- `just test -p codex-core unified_exec::process_tests::`: 4 passed
- `just test -p codex-exec-server`: 294 passed, 2 skipped
- `just test -p codex-exec-server-protocol`: 5 passed
- `just test -p codex-rmcp-client`: 89 passed, 2 skipped
- focused Bazel `//codex-rs/core:core-all-test`: passed across 16 shards
- scoped `just fix` passed for core and exec-server
- `just fmt` passed
The complete workspace suite was not rerun; focused Cargo and Bazel
coverage passed for the changed behavior.
## Why
First-party async traits should expose their `Send` contracts explicitly
without requiring `async_trait`. This completes the migration pattern
established in #27303 and #27304.
## What changed
- Replaced the remaining first-party `async_trait` traits with native
return-position `impl Future + Send` where statically dispatched and
explicit boxed `Send` futures where object safety is required.
- Kept implementations behavior-preserving, outlining existing async
bodies into inherent methods where that keeps the diff reviewable.
- Removed all direct first-party `async-trait` dependencies and the
workspace dependency declaration.
- Added a cargo-deny policy that permits `async-trait` only through the
remaining transitive wrapper crates.
- Updated `rand` from 0.8.5 to 0.8.6 to resolve RUSTSEC-2026-0097 and
keep the full cargo-deny check passing.
## Validation
- `just test -p codex-exec-server`: 216 passed, 2 skipped.
- `just test -p codex-model-provider`: 39 passed.
- `just test -p codex-core` and `just test`: changed tests passed;
remaining failures are environment-sensitive suites unrelated to this
migration.
- `cargo deny check`
- `just fix`
- `just fmt`
- `cargo shear`
- `just bazel-lock-check`
## Why
A long-running unified exec process started with `tty: false` could not
be interrupted via `write_stdin`: ordinary non-TTY stdin writes are
rejected once stdin is closed, but an exact U+0003 payload should still
map to a process interrupt. The interrupt should flow through the same
process lifecycle path as a real signal so Codex preserves
process-reported output and exit metadata instead of fabricating a
Ctrl-C exit code or tearing down the session early.
## What Changed
- Add `process/signal` to exec-server with `ProcessSignal::Interrupt`
and an empty response.
- Add a non-consuming `ProcessHandle::signal` path for spawned
processes; on Unix it sends SIGINT to the process group and leaves
terminate/hard-kill unchanged.
- Route non-TTY U+0003 `write_stdin` through `process.signal(...)`
instead of `terminate`, then let the normal post-write collection path
drain output and observe exit.
- Add exec-server coverage where a shell `trap INT` handler prints the
signal and exits with its own code.
- Add unified exec coverage where a `tty: false` process traps SIGINT,
emits output, and exits with its own code.
## Validation
- `just test -p codex-exec-server
exec_process_signal_interrupts_process`
- `just test -p codex-exec-server`
- `just test -p codex-core
write_stdin_ctrl_c_interrupts_non_tty_session`
## Summary
- migrate exec-server remote registration naming from executor to
environment
- align CLI, public Rust exports, registry error messages, and relay
test fixtures with the environment registry contract
- keep the live registration path and response model consistent with
`/cloud/environment/{environment_id}/register`
## Verification
- `cargo test -p codex-exec-server
remote::tests::register_environment_posts_with_auth_provider_headers
--manifest-path /Users/richardlee/code/codex/codex-rs/Cargo.toml`
- `cargo test -p codex-exec-server --test relay
multiplexed_remote_environment_routes_independent_virtual_streams
--manifest-path /Users/richardlee/code/codex/codex-rs/Cargo.toml`
- `cargo check -p codex-cli --manifest-path
/Users/richardlee/code/codex/codex-rs/Cargo.toml` (still running when PR
opened; will update after completion if needed)
## Summary
- Add a pushed `ExecProcessEvent` stream alongside retained
`process/read` output.
- Publish local and remote output, exit, close, and failure events.
- Cover the event stream with shared local/remote exec process tests.
## Testing
- `cargo check -p codex-exec-server`
- `cargo check -p codex-rmcp-client`
- Not run: `cargo test` per repo instruction; CI will cover.
## Stack
```text
o #18027 [6/6] Fail exec client operations after disconnect
│
o #18212 [5/6] Wire executor-backed MCP stdio
│
o #18087 [4/6] Abstract MCP stdio server launching
│
@ #18020 [3/6] Add pushed exec process events
│
o #18086 [2/6] Support piped stdin in exec process API
│
o #18085 [1/6] Add MCP server environment config
│
o main
```
---------
Co-authored-by: Codex <noreply@openai.com>
This PR partially rebase `unified_exec` on the `exec-server` and adapt
the `exec-server` accordingly.
## What changed in `exec-server`
1. Replaced the old "broadcast-driven; process-global" event model with
process-scoped session events. The goal is to be able to have dedicated
handler for each process.
2. Add to protocol contract to support explicit lifecycle status and
stream ordering:
- `WriteResponse` now returns `WriteStatus` (Accepted, UnknownProcess,
StdinClosed, Starting) instead of a bool.
- Added seq fields to output/exited notifications.
- Added terminal process/closed notification.
3. Demultiplexed remote notifications into per-process channels. Same as
for the event sys
4. Local and remote backends now both implement ExecBackend.
5. Local backend wraps internal process ID/operations into per-process
ExecProcess objects.
6. Remote backend registers a session channel before launch and
unregisters on failed launch.
## What changed in `unified_exec`
1. Added unified process-state model and backend-neutral process
wrapper. This will probably disappear in the future, but it makes it
easier to keep the work flowing on both side.
- `UnifiedExecProcess` now handles both local PTY sessions and remote
exec-server processes through a shared `ProcessHandle`.
- Added `ProcessState` to track has_exited, exit_code, and terminal
failure message consistently across backends.
2. Routed write and lifecycle handling through process-level methods.
## Some rationals
1. The change centralizes execution transport in exec-server while
preserving policy and orchestration ownership in core, avoiding
duplicated launch approval logic. This comes from internal discussion.
2. Session-scoped events remove coupling/cross-talk between processes
and make stream ordering and terminal state explicit (seq, closed,
failed).
3. The failure-path surfacing (remote launch failures, write failures,
transport disconnects) makes command tool output and cleanup behavior
deterministic
## Follow-ups:
* Unify the concept of thread ID behind an obfuscated struct
* FD handling
* Full zsh-fork compatibility
* Full network sandboxing compatibility
* Handle ws disconnection
## Summary
- match the exec-process structure to filesystem PR #15232
- expose `ExecProcess` on `Environment`
- make `LocalProcess` the real implementation and `RemoteProcess` a thin
network proxy over `ExecServerClient`
- make `ProcessHandler` a thin RPC adapter delegating to `LocalProcess`
- add a shared local/remote process test
## Validation
- `just fmt`
- `CARGO_TARGET_DIR=~/.cache/cargo-target/codex cargo test -p
codex-exec-server`
- `just fix -p codex-exec-server`
---------
Co-authored-by: Codex <noreply@openai.com>
