diff --git a/1.0.0/42_addons/3_NAS.md b/1.0.0/42_addons/3_NAS.md
index fc1abd2..c101a7d 100644
--- a/1.0.0/42_addons/3_NAS.md
+++ b/1.0.0/42_addons/3_NAS.md
@@ -4,13 +4,13 @@ By default images are stored on the SD card of the Raspberry Pi, in the folder *
 
 ## Let's get started
 
-First you will need to connect to the Raspberry Pi, you can find a how to [on our FAQ page](/1.0.0/FAQ#how-to-access-the-pi).
+First you will need to connect to the Raspberry Pi, you can find a how to **[on our FAQ page](/1.0.0/FAQ#how-to-access-the-pi)**.
 
-Next you will need to mount the NAS to the filesystem of your Rapsberry Pi. In order to make a permanent mount you need to edit the fstab file.
+Next you will need to **mount the NAS to the filesystem** of your Rapsberry Pi. In order to make a permanent mount you need to **edit** the **fstab file**.
 
     nano /etc/fstab
 
-Add following line (replace variables with your own credentials):
+Add following line (replace variables **with your own credentials**):
 
     //ip_address_to_your_nas/directory_on_your_nas /home/kerberos-web/public/capture cifs username=user_on_your_nas,password=password_for_your_nas,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
 
@@ -18,8 +18,8 @@ Mount the NAS
 
     mount -a
 
-Check if the mount was successful, you should see the already existing content on your referred NAS directory.
+Check if the mount was **successful**, you should see the already existing content on your referred NAS directory.
 
     cd /home/kerberos-web/public/capture && ls -l
 
-And that's it. From now the machinery will store it's images directly on your NAS, and the webinterface will visualize them.
\ No newline at end of file
+And *that's it*. From now the machinery will store it's images directly on your NAS, and the web interface will visualize them.
\ No newline at end of file
diff --git a/dev/42_addons/3_NAS.md b/dev/42_addons/3_NAS.md
deleted file mode 100644
index 51522d5..0000000
--- a/dev/42_addons/3_NAS.md
+++ /dev/null
@@ -1,25 +0,0 @@
-# NAS
-
-By default images are stored on the SD card of the Raspberry Pi, in the folder **/home/kerberos-web/public/capture**. However it's also possible to store the images directly on a NAS (e.g. WD MyBook). To achieve this, you will need to do some minimal modifications to the Kerberos image. 
-
-## Let's get started
-
-First you will need to connect to the Raspberry Pi, you can find a how to [on our FAQ page](/dev/FAQ#how-to-access-the-pi).
-
-Next you will need to mount the NAS to the filesystem of your Rapsberry Pi. In order to make a permanent mount you need to edit the fstab file.
-
-    nano /etc/fstab
-
-Add following line (replace variables with your own credentials):
-
-    //ip_address_to_your_nas/directory_on_your_nas /home/kerberos-web/public/capture cifs username=user_on_your_nas,password=password_for_your_nas,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
-
-Mount the NAS
-
-    mount -a
-
-Check if the mount was successful, you should see the already existing content on your referred NAS directory.
-
-    cd /home/kerberos-web/public/capture && ls -l
-
-And that's it. From now the machinery will store it's images directly on your NAS, and the webinterface will visualize them.
\ No newline at end of file